Hi Guys
Hi recently Canon 7 DSLR Camera Lenses Zoom Lens, Macro Lens a prime lens were not communicating with camera body and was worried not knowing what to do.
I did watch YouTube channel videos, followed the advice and got through with the problem, all lenses are communicating with Camera body
Prabhi S

What did you do?

gasrocks said:What did you do?

Purchased a camera cleaning kit contained a set of brushes,3 sets of cleaning cloth, lens cleaning liquid, a blower and a Micro Pro compact cleaning lens pen. Turned the camera switch to off mode, held the camera with the lens attached facing the ground used the air blower to blow any dust that might have collected, removed the lens cleaned contact points on camera and the camera body with same air blower to blow the dust, repeated the process several time.
Reattached lens to the camera body, turned switch on, no error code(01)appeared.
lastly took some shots and images were good.
Prabhi S

Thanks for sharing. Glad you did all of that and that you no longer get error codes. Now for the rest of you. Canon error code 1 is the mot common error code usually seen. Lens communication error. Get a pencil and use the eraser to clean the contacts on the back of the lens and the contacts inside of the camera mount inside the camera. Use canned "air" after you are done. Lens cleaning liquid is a big no-no as are lens cleaning tissues. Gene

gasrocks said:Thanks for sharing. Glad you did all of that and that you no longer get error codes. Now for the rest of you. Canon error code 1 is the mot common error code usually seen. Lens communication error. Get a pencil and use the eraser to clean the contacts on the back of the lens and the contacts inside of the camera mount inside the camera. Use canned "air" after you are done. Lens cleaning liquid is a big no-no as are lens cleaning tissues. Gene

Think you.