Sweetgreen said:We use the 2×4 fence wire stapled to 2×4 wood frame , set up on one block sideways and one standing up , the width of the bench its determined by the flats with the front of some flats hanging a little off the table but be mindful of how you face the wire rails so that the flats will slide say from aile to other side of table , this is because we have a tram car hanging from the rafters with shelves rolling on rollers hooked to pipe rails so a track goes eighter through the middle or around the green house out the door to outside tables .
« Return to the thread "shelving in greenhouse"
« Return to Greenhouses forum
« Return to the Garden.org homepage
